Sheet Metal

Lets grow the sport

Sheet metal fabrication is not for everyone there is a trick to it. I built myself a 4 foot bending machine from angle iron and tubes. I pretty much used it for all of my body parts.

In about 15 minutes you have a stainless tunnel cover trim it a bit clean up the edges. 

Painting Aluminum

Aluminum can be buffed to look almost like chrome but its easily scratched. I start with 600 with water then 800 then 1200. After this a buffing wheel with green rouge and finish up with white rouge. Lots of work.

Buffing

Aluminum can be buffed to look almost like chrome but its easily scratched. I start with 600 with water then 800 then 1200. After this a buffing wheel with green rouge and finish up with white rouge. Lots of work.

Close Menu
Skip to toolbar